<![CDATA[about choice]]>https://youtu.be/FNO08SKcyVI?feature=shared 1，Filled shapes cannot be selected by clicking on the filled part, only by clicking on the border (the same is true for images).
2，After selecting an object, clicking on the blank area within its region cannot cancel the selection, only on the outside of the region can cancel the selection. These two points need to be optimized.

]]>https://www.vectorstyler.com/forum/topic/4477/about-choiceRSS for NodeSun, 13 Sep 2026 18:19:34 GMTFri, 05 Jul 2024 14:51:35 GMT60<![CDATA[Reply to about choice on Mon, 30 Sep 2024 12:15:18 GMT]]>@VectorStyler 0_1727698512968_6.vstyler

]]>https://www.vectorstyler.com/forum/post/27208https://www.vectorstyler.com/forum/post/27208Mon, 30 Sep 2024 12:15:18 GMT<![CDATA[Reply to about choice on Mon, 30 Sep 2024 11:51:14 GMT]]>@monsterfox Send me that file.

]]>https://www.vectorstyler.com/forum/post/27207https://www.vectorstyler.com/forum/post/27207Mon, 30 Sep 2024 11:51:14 GMT<![CDATA[Reply to about choice on Mon, 30 Sep 2024 11:20:25 GMT]]>@VectorStyler 0_1727695158254_1.png 0_1727695162201_2.png In this mode, the graphics below the color cannot be selected.

]]>https://www.vectorstyler.com/forum/post/27206https://www.vectorstyler.com/forum/post/27206Mon, 30 Sep 2024 11:20:25 GMT<![CDATA[Reply to about choice on Sun, 29 Sep 2024 13:27:44 GMT]]>@VectorStyler I've found the problem. This is because the graphic is a filled and unclosed graphic that the outer shape can be selected. Unfilled unclosed paths will not be selected.

]]>https://www.vectorstyler.com/forum/post/27198https://www.vectorstyler.com/forum/post/27198Sun, 29 Sep 2024 13:27:44 GMT<![CDATA[Reply to about choice on Sun, 29 Sep 2024 09:41:48 GMT]]>@monsterfox said in about choice:

@VectorStyler It's a bit strange. The test results today are different from yours.

Can you send me the file, containing only the drawing from where the box selection selects the outer shape also.
Could be that we are testing with a different version of the file.

]]>https://www.vectorstyler.com/forum/post/27190https://www.vectorstyler.com/forum/post/27190Sun, 29 Sep 2024 09:41:48 GMT<![CDATA[Reply to about choice on Fri, 27 Sep 2024 16:25:47 GMT]]>@monsterfox This could be caused by some settings related to how the selection works.

]]>https://www.vectorstyler.com/forum/post/27175https://www.vectorstyler.com/forum/post/27175Fri, 27 Sep 2024 16:25:47 GMT<![CDATA[Reply to about choice on Fri, 27 Sep 2024 16:05:47 GMT]]>@VectorStyler It's a bit strange. The test results today are different from yours.

]]>https://www.vectorstyler.com/forum/post/27174https://www.vectorstyler.com/forum/post/27174Fri, 27 Sep 2024 16:05:47 GMT<![CDATA[Reply to about choice on Fri, 27 Sep 2024 15:54:09 GMT]]>@monsterfox Tried all, same result.

]]>https://www.vectorstyler.com/forum/post/27173https://www.vectorstyler.com/forum/post/27173Fri, 27 Sep 2024 15:54:09 GMT<![CDATA[Reply to about choice on Fri, 27 Sep 2024 12:23:27 GMT]]>@VectorStyler You try this graphic in size 38.
。0_1727439799029_1.png

]]>https://www.vectorstyler.com/forum/post/27167https://www.vectorstyler.com/forum/post/27167Fri, 27 Sep 2024 12:23:27 GMT<![CDATA[Reply to about choice on Fri, 27 Sep 2024 10:13:19 GMT]]>@monsterfox I tried with the file: https://share.cleanshot.com/3DdbdYYF

]]>https://www.vectorstyler.com/forum/post/27165https://www.vectorstyler.com/forum/post/27165Fri, 27 Sep 2024 10:13:19 GMT<![CDATA[Reply to about choice on Fri, 27 Sep 2024 08:22:56 GMT]]>@VectorStyler said in about choice:

I could not replicate the selection issue from the first image. This might be a caused by some selection settings (I have the default settings here).

A file I provided above. You can have a try.

]]>https://www.vectorstyler.com/forum/post/27162https://www.vectorstyler.com/forum/post/27162Fri, 27 Sep 2024 08:22:56 GMT<![CDATA[Reply to about choice on Fri, 27 Sep 2024 08:01:42 GMT]]>@monsterfox I could not replicate the selection issue from the first image. This might be a caused by some selection settings (I have the default settings here).

]]>https://www.vectorstyler.com/forum/post/27160https://www.vectorstyler.com/forum/post/27160Fri, 27 Sep 2024 08:01:42 GMT<![CDATA[Reply to about choice on Thu, 26 Sep 2024 16:11:31 GMT]]>@monsterfox said in about choice:

For the first picture, when choosing the inner shape, the outer lines are still selected

I will try to fix these.

]]>https://www.vectorstyler.com/forum/post/27156https://www.vectorstyler.com/forum/post/27156Thu, 26 Sep 2024 16:11:31 GMT<![CDATA[Reply to about choice on Thu, 26 Sep 2024 15:02:07 GMT]]>@VectorStyler 0_1727362078605_mmexport1727362020006.png 0_1727362089081_mmexport1727362024160.png 0_1727362577735_3_1.vstyler
For the first picture, when choosing the inner shape, the outer lines are still selected. It is found that this is not a closed line. If it were a closed line, it would not be selected. I hope this problem can be fixed. For the second picture, the black line represents the original position of the shape. Use the shape replacement tool on the left, with the black letters above as the target source. After replacement, the original shape will be offset, which is the position of the red line. I hope these two problems can be fixed together. Thank you.

]]>https://www.vectorstyler.com/forum/post/27154https://www.vectorstyler.com/forum/post/27154Thu, 26 Sep 2024 15:02:07 GMT<![CDATA[Reply to about choice on Mon, 29 Jul 2024 15:12:27 GMT]]>@monsterfox said in about choice:

Hope to be able to frame-select without selecting the outline

I will try to fix this for the next build.

]]>https://www.vectorstyler.com/forum/post/26665https://www.vectorstyler.com/forum/post/26665Mon, 29 Jul 2024 15:12:27 GMT<![CDATA[Reply to about choice on Mon, 29 Jul 2024 14:49:32 GMT]]>@VectorStyler https://youtu.be/QpAvcIyHdnU?feature=shared Currently, it seems that it is not possible to frame-select within the graphic, which will cause the outline to be selected together, but the several red graphics are exceptions.Hope to be able to frame-select without selecting the outline. Please fix it, thank you.

]]>https://www.vectorstyler.com/forum/post/26662https://www.vectorstyler.com/forum/post/26662Mon, 29 Jul 2024 14:49:32 GMT<![CDATA[Reply to about choice on Mon, 15 Jul 2024 10:15:41 GMT]]>@VectorStyler There is a problem inside (2). The outermost group is filled and has a gap, so it is always selected. When the filling state of it is cancelled, framing in the middle blank area will select all 6 groups, which is also a mistake. I hope to solve it together. Thank you.

]]>https://www.vectorstyler.com/forum/post/26479https://www.vectorstyler.com/forum/post/26479Mon, 15 Jul 2024 10:15:41 GMT<![CDATA[Reply to about choice on Mon, 15 Jul 2024 05:42:36 GMT]]>@monsterfox

(2) replacicated, (1) and (3) are not.

  1. selection is cancelled when I click inside.
  2. this will be fixed.
  3. I can select this object with a simple click on the outline, also with box selection.
]]>https://www.vectorstyler.com/forum/post/26471https://www.vectorstyler.com/forum/post/26471Mon, 15 Jul 2024 05:42:36 GMT<![CDATA[Reply to about choice on Mon, 15 Jul 2024 04:52:18 GMT]]>@VectorStyler 0_1721019117949_1.png 0_1721019123128_1.vstyler
1 Click in the center of the blank after framing to cancel the selection.
2 After framing, it is necessary to click the blank twice to cancel the selection of 5 objects, and the other 1 cannot be canceled.
3 That is the object that cannot be selected. Please see what the reason is.

]]>https://www.vectorstyler.com/forum/post/26470https://www.vectorstyler.com/forum/post/26470Mon, 15 Jul 2024 04:52:18 GMT<![CDATA[Reply to about choice on Sun, 14 Jul 2024 14:23:45 GMT]]>@VectorStyler Tomorrow I'll test it again, just remember there's an exception in one mode.

]]>https://www.vectorstyler.com/forum/post/26449https://www.vectorstyler.com/forum/post/26449Sun, 14 Jul 2024 14:23:45 GMT<![CDATA[Reply to about choice on Sun, 14 Jul 2024 14:02:15 GMT]]>@monsterfox Yes, that is the monochrome preview mode. In that case filled shapes are shown as filled and should be selected as such.
The wire frame (outline only) mode is the first icon, in which case filled shapes can be selected by outline only.

]]>https://www.vectorstyler.com/forum/post/26448https://www.vectorstyler.com/forum/post/26448Sun, 14 Jul 2024 14:02:15 GMT<![CDATA[Reply to about choice on Sun, 14 Jul 2024 13:58:10 GMT]]>@VectorStyler 0_1720965379469_IMG_20240714_215536.jpg This model，Poor English, please excuse me.

]]>https://www.vectorstyler.com/forum/post/26447https://www.vectorstyler.com/forum/post/26447Sun, 14 Jul 2024 13:58:10 GMT<![CDATA[Reply to about choice on Sun, 14 Jul 2024 13:32:23 GMT]]>@monsterfox said in about choice:

but there is still a problem in the contour preview mode

Can you send me an example. Is this the wire frame preview mode?

]]>https://www.vectorstyler.com/forum/post/26444https://www.vectorstyler.com/forum/post/26444Sun, 14 Jul 2024 13:32:23 GMT<![CDATA[Reply to about choice on Sun, 14 Jul 2024 13:27:27 GMT]]>@VectorStyler The updated version allows you to click on the blank to cancel the selection, but there is still a problem in the contour preview mode. The filled object in this mode can be understood as a blank area, so please add this feature.

]]>https://www.vectorstyler.com/forum/post/26442https://www.vectorstyler.com/forum/post/26442Sun, 14 Jul 2024 13:27:27 GMT