<![CDATA[About page]]>0_1714057833928_mmexport1714056204899.png The mouse pointer selects the second page, but the page display below will not be on the second page, and the corresponding page display will only appear when the page tool clicks on the page.Can this be improved?
0_1714057855010_mmexport1714056206507.png I set the size of a page, and when I add a page, the size that appears is not the one I set, but the preset page of the software. It should be based on the currently displayed page.0_1714058872970_mmexport1714056208646.png The function of printing the selection page is very good. Can the encoding of the page be added here, which can facilitate users to select the corresponding page more intuitively.

]]>https://www.vectorstyler.com/forum/topic/4203/about-pageRSS for NodeSun, 17 May 2026 11:56:48 GMTThu, 25 Apr 2024 15:22:15 GMT60<![CDATA[Reply to About page on Mon, 20 Jan 2025 08:37:41 GMT]]>@VectorStyler I don't think it's necessary. This seems like an action where there are two steps: 1. Create a new canvas, 2. Maximize the canvas display. The shortcut key operation is just for the convenience of adding a canvas. I have also set a separate shortcut key for maximizing the canvas display. I believe most people share my view. This is more in line with the actual operating habits.

]]>https://www.vectorstyler.com/forum/post/28545https://www.vectorstyler.com/forum/post/28545Mon, 20 Jan 2025 08:37:41 GMT<![CDATA[Reply to About page on Sun, 19 Jan 2025 16:56:35 GMT]]>@monsterfox This is by design. I can change it, but not sure that focusing on the added artboard is best in this case.

]]>https://www.vectorstyler.com/forum/post/28537https://www.vectorstyler.com/forum/post/28537Sun, 19 Jan 2025 16:56:35 GMT<![CDATA[Reply to About page on Sun, 19 Jan 2025 09:33:24 GMT]]>@VectorStyler The "Add Artboard" button in VS does not maximize the display of the artboard. However, artboards added using the shortcut key will be displayed in a maximized manner. I hope this issue can be resolved.
https://www.youtube.com/watch?v=ymj0_ZI0h7o

]]>https://www.vectorstyler.com/forum/post/28535https://www.vectorstyler.com/forum/post/28535Sun, 19 Jan 2025 09:33:24 GMT<![CDATA[Reply to About page on Fri, 20 Dec 2024 16:51:06 GMT]]>@monsterfox said in About page:

maximizing the display of the current drawing board will be added to this menu

This is in the view menu (if I understood correctly).

removed so that it will look more concise and clean.

You can hide the artboard labels with View -> Margins -> Show Artboard Labels

]]>https://www.vectorstyler.com/forum/post/28371https://www.vectorstyler.com/forum/post/28371Fri, 20 Dec 2024 16:51:06 GMT<![CDATA[Reply to About page on Fri, 20 Dec 2024 14:58:26 GMT]]>@VectorStyler 0_1734706179551_mmexport1734705243547.png 0_1734706195881_mmexport1734705246415.png

  1. It is hoped that a function of maximizing the display of the current drawing board will be added to this menu, and this function has the same effect as maximizing the display of the current drawing board after clicking on the drawing board in the canvas panel.
    0_1734706407035_mmexport1734705250028.png 0_1734706419618_mmexport1734705254103.png
    2.At present, after clicking on the drawing board, the drawing board property bar below will automatically recognize the code of the current drawing board. Therefore, the English names of these drawing boards are now redundant and it is hoped that they can be removed so that it will look more concise and clean.
]]>https://www.vectorstyler.com/forum/post/28368https://www.vectorstyler.com/forum/post/28368Fri, 20 Dec 2024 14:58:26 GMT<![CDATA[Reply to About page on Tue, 17 Dec 2024 15:12:52 GMT]]>@VectorStyler By the way, as shown in the figure, the shortcut keys cannot be set. I hope it can be fixed.
0_1734448367565_IMG_20241217_231047.jpg

]]>https://www.vectorstyler.com/forum/post/28300https://www.vectorstyler.com/forum/post/28300Tue, 17 Dec 2024 15:12:52 GMT<![CDATA[Reply to About page on Tue, 17 Dec 2024 15:03:24 GMT]]>@monsterfox I added this to the backlog.

]]>https://www.vectorstyler.com/forum/post/28298https://www.vectorstyler.com/forum/post/28298Tue, 17 Dec 2024 15:03:24 GMT<![CDATA[Reply to About page on Tue, 17 Dec 2024 15:00:46 GMT]]>@VectorStyler The function of the red arrow above is not in the shortcut key list. What is in the list is the dialog box for batch - creating drawing boards. I hope it can be added in. 0_1734447639637_mmexport1734446071681.png

]]>https://www.vectorstyler.com/forum/post/28297https://www.vectorstyler.com/forum/post/28297Tue, 17 Dec 2024 15:00:46 GMT<![CDATA[Reply to About page on Thu, 12 Dec 2024 14:32:52 GMT]]>@monsterfox said in About page:

I can't quite understand the meaning of the activity page.

The active page is used by some actions, like exporting (current artboard) or zooming to artboard.

]]>https://www.vectorstyler.com/forum/post/28238https://www.vectorstyler.com/forum/post/28238Thu, 12 Dec 2024 14:32:52 GMT<![CDATA[Reply to About page on Tue, 10 Dec 2024 15:57:05 GMT]]>@VectorStyler

  1. Let the ordinary pointer tool have the function of recognizing the drawing board code.

Does this mean that when clicking on a page, that should become the active page?

I can't quite understand the meaning of the activity page. For Freehand, simply click on the drawing board. Only the drawing board bar below needs to be able to recognize the current drawing board's code, without the need to select and move the drawing board. Recognition alone is sufficient. And this does not conflict with the properties of the drawing board tools. I hope this feature can be added.

]]>https://www.vectorstyler.com/forum/post/28204https://www.vectorstyler.com/forum/post/28204Tue, 10 Dec 2024 15:57:05 GMT<![CDATA[Reply to About page on Tue, 10 Dec 2024 15:37:26 GMT]]>@VectorStyler 0_1733844617332_mmexport1733842583565.png
This operation is much more convenient now. There is also a problem. The arrangement methods of the third and fourth in the first row should be in a horizontal row and a vertical row to arrange the drawing board, but it seems ineffective (after modifying the two rows, it is ineffective to use this arrangement method again).

]]>https://www.vectorstyler.com/forum/post/28200https://www.vectorstyler.com/forum/post/28200Tue, 10 Dec 2024 15:37:26 GMT<![CDATA[Reply to About page on Mon, 02 Dec 2024 06:15:36 GMT]]>@monsterfox said in About page:

It is recommended to adopt the arrangement method of AI software and use five buttons for control.

I will try to improve this.

]]>https://www.vectorstyler.com/forum/post/28093https://www.vectorstyler.com/forum/post/28093Mon, 02 Dec 2024 06:15:36 GMT<![CDATA[Reply to About page on Sun, 01 Dec 2024 15:00:44 GMT]]>@VectorStyler 0_1733065206648_mmexport1733064481088.png 0_1733065222460_mmexport1733064474694.png 0_1733065230138_mmexport1733064478152.png At present, VS can basically complete the form of artboard arrangement, but the control of artboard coding during typesetting is still insufficient. When one row of artboards is arranged into two rows, the artboard coding has odd numbers on the top and even numbers on the bottom, and the logic is a bit wrong. It is recommended to adopt the arrangement method of AI software and use five buttons for control. The first four buttons control the arrangement direction, and the fifth button reverses the direction. I think this can basically meet the needs of most people. Please add this function.

]]>https://www.vectorstyler.com/forum/post/28090https://www.vectorstyler.com/forum/post/28090Sun, 01 Dec 2024 15:00:44 GMT<![CDATA[Reply to About page on Sat, 30 Nov 2024 21:05:33 GMT]]>@monsterfox said in About page:

and when its position is moved, the code of the current drawing board will be updated automatically.

This cannot be done in VectorStyler. The artboard names are associated (and editable) to the artboard and they cannot change based on position.

]]>https://www.vectorstyler.com/forum/post/28087https://www.vectorstyler.com/forum/post/28087Sat, 30 Nov 2024 21:05:33 GMT<![CDATA[Reply to About page on Sat, 30 Nov 2024 15:03:47 GMT]]>@VectorStyler https://youtu.be/ikrYV0BgwTs?feature=shared
For the third point, Freehand can be referred to. Select any drawing board randomly, and when its position is moved, the code of the current drawing board will be updated automatically. (Pay attention to the change of the drawing board code below.) The coding sequence is always in the order from top to bottom and from left to right. If Visual Studio (VS) uses this feature, it will be much more natural to view the order of the drawing board codes when arranging the drawing boards. First, there will be no situation where the drawing board codes are odd numbers above and even numbers below. Second, there will be no situation where the drawing board codes are arranged in a ring - like pattern, which is very difficult to operate. I hope this function can be added. Thank you.

]]>https://www.vectorstyler.com/forum/post/28086https://www.vectorstyler.com/forum/post/28086Sat, 30 Nov 2024 15:03:47 GMT<![CDATA[Reply to About page on Fri, 29 Nov 2024 23:12:55 GMT]]>@VectorStyler 1.It is also very useful when printing the current drawing board.。A greater need for the function of 2 is to paste the required graphics to the exact center of the drawing board, which makes it more convenient to arrange and print the graphics. (Of course, a function of pasting to the center of the view that I mentioned before needs to be added here.)

]]>https://www.vectorstyler.com/forum/post/28072https://www.vectorstyler.com/forum/post/28072Fri, 29 Nov 2024 23:12:55 GMT<![CDATA[Reply to About page on Fri, 29 Nov 2024 15:39:31 GMT]]>@VectorStyler Generally, 1 and 2 are used in coordination to select a specified drawing board and maximize its display. （2）Pay attention to viewing the "Freehand" clip, the pictures from 47 to 55 seconds. （4）The function of 4 is based on the fact that a certain amount of work has been completed, the drawing boards have been arranged, and the printing work has been finished. However, suddenly new workload is added, and a certain number of new drawing boards need to be created and arranged again. If the drawing board arrangement function is used again, the printed and unprinted drawing boards will be mixed up. Therefore, it is hoped to add this function.

]]>https://www.vectorstyler.com/forum/post/28071https://www.vectorstyler.com/forum/post/28071Fri, 29 Nov 2024 15:39:31 GMT<![CDATA[Reply to About page on Fri, 29 Nov 2024 15:10:51 GMT]]>@monsterfox said in About page:

  1. Let the ordinary pointer tool have the function of recognizing the drawing board code.

Does this mean that when clicking on a page, that should become the active page?

  1. A function that conforms to the current drawing board display needs to be added.

Not clear what this means.

  1. The order of arranging the drawing board codes should be coded according to the order from left to right and from top to bottom.

This will not be possible. Artboards can be positioned arbitrarily on the canvas.

  1. Arranging the drawing boards will automatically globally arrange the order of all the drawing boards. (It is recommended that when no drawing boards are selected, all drawing boards can be globally arranged. But if a certain number of drawing boards are selected, only the selected drawing boards are arranged, so as to avoid the order of a batch of arranged drawing boards from being disrupted again.)

This should work with the Canvas -> Arrange Artboards, do we need something different?

]]>https://www.vectorstyler.com/forum/post/28070https://www.vectorstyler.com/forum/post/28070Fri, 29 Nov 2024 15:10:51 GMT<![CDATA[Reply to About page on Fri, 29 Nov 2024 15:05:52 GMT]]>@VectorStyler https://youtu.be/o8wmwmG2-CA?feature=shared
There are still four functions to be added.

  1. Let the ordinary pointer tool have the function of recognizing the drawing board code.
  2. A function that conforms to the current drawing board display needs to be added.
  3. The order of arranging the drawing board codes should be coded according to the order from left to right and from top to bottom.
  4. Arranging the drawing boards will automatically globally arrange the order of all the drawing boards. (It is recommended that when no drawing boards are selected, all drawing boards can be globally arranged. But if a certain number of drawing boards are selected, only the selected drawing boards are arranged, so as to avoid the order of a batch of arranged drawing boards from being disrupted again.)
    For the first point and the second point, the Freehand software can be referred to.
]]>https://www.vectorstyler.com/forum/post/28069https://www.vectorstyler.com/forum/post/28069Fri, 29 Nov 2024 15:05:52 GMT<![CDATA[Reply to About page on Thu, 21 Nov 2024 14:44:54 GMT]]>https://youtu.be/Ec_dYAKO6WY?feature=shared The logic of creating a new drawing board is not based on the currently displayed drawing board. It is relatively uncontrollable. It is hoped to refer to the functions of Freehand.

]]>https://www.vectorstyler.com/forum/post/27974https://www.vectorstyler.com/forum/post/27974Thu, 21 Nov 2024 14:44:54 GMT<![CDATA[Reply to About page on Thu, 21 Nov 2024 07:14:12 GMT]]>@hbalcic said in About page:

Shouldn't these pages push each other?

No, artboards can partially (or fully) overlap in VS, sharing content.

]]>https://www.vectorstyler.com/forum/post/27947https://www.vectorstyler.com/forum/post/27947Thu, 21 Nov 2024 07:14:12 GMT