Bug List for Version 1.3
-
@VectorStyler 17，When selecting multiple objects by holding down the Shift key, clicking on an empty area will deselect all objects .
-
@monsterfox said in Bug List for Version 1.3:
When selecting multiple objects by holding down the Shift key, clicking on an empty area will deselect all objects .
I will fix this
-
@VectorStyler In 2025.12.11.23:33 the error of incorrect scaling when importing the two DXF files contained in the compressed package I provided into the program has not been fixed yet. It is hoped that this issue can be resolved.
-
@VectorStyler Fixed a bug in sizing imported SVGs（I tested those two files, and the error still exists. It still needs to be fixed.）If you import these two files into Illustrator and VS respectively, you'll see the difference. The size in AI is correct.
-
@monsterfox said in Bug List for Version 1.3:
In 2025.12.11.23:33 the error of incorrect scaling when importing the two DXF files contained in the compressed package I provided into the program has not been fixed yet.
I tested with those two files, both in VectorStyler and Illustrator 2026 and the sizes are the same
-
@monsterfox said in Bug List for Version 1.3:
If you import these two files into Illustrator and VS respectively
Can you reupload these two SVG files, I'm not sure if I tested with the same.
-
@VectorStyler picture.dxf.zip Both files become smaller after import, so the size is not correct. Also, if you use the drag-and-drop method, one of the files cannot perform this operation. Please test it again.
-
@monsterfox Also send me a VectorStyler file with these files imported (I want to check the result of importing as it happens for you).
-
These are the VS files I get with importing the DXF files:
In Adobe Illustrator 2026:
the "22.dxf" file imports and has the same size as in VS: width 223.8 pt, height 208 pt
Illustrator cannot import or open the "Picture.DXF.dxf" file -
-
@monsterfox The VS document is in MM the Illustrator in PT
78.96 mm is about 223.83 pt
-
@VectorStyler No, both of my software are set to MM as the unit.
-
@monsterfox I will have to review the DXF format to see how the units are handled. I reopened this bug.
